Sliding Units

Horizontal Sliding Units

Horizontal

  1. Sliding panels are top suspended and glide easily over aluminum track on nylon rollers
  2. Standard installations consist of sliding panels and fixed back panel
  3. 3 and 4 track units have one sliding panel per track. Panels cover approximately one-half the unit
  4. Porcelain enamel steel markerboard sliding panels and back panel; satin anodize finish aluminum frame and housing

Options:

  1. Vitracite chalkboard
  2. Claridge Cork, Designer Fabric, Fabricork, or Tan Nucork tackable surfaces
  3. Glass beaded projection screen
  4. Units with no back panel
  5. Medium or Dark Bronze anodize finish in lieu of satin
  6. Powder Coat Finish
  7. Extra sliding panels available
  8. Motor operated horizontal sliding units

Vertical Sliding Units

Vertical

  1. Panels slide from the floor to the top of the unit (with opeional kick panel, sliding panels can be concealed when in down position, leaving the entire rear wall surface exposed)
  2. Panels attach to counterweights to eliminate racking
  3. Counter-balanced panels operate over ball bearing neoprene rollers to eliminate all binding, side sway and noise
  4. Housing and all trim are heavy-gauge extruded aluminum in satin anodize finish
  5. Ideal for heavy use areas, sliding panels are 7/8" thick
  6. Balanced, lightweight panel construction safeguards against warpage. Provides needed rigidity and elimates to and from movement when panels are in use.
  7. Vertical sliding units are fitted, assembled and rected on a test panel at the factory before shipping. Components are clearly marked for easy reassembly at the jobsite
  8. Porcelain enamel steel markerboard sliding panels and back panel; satin anodize finish aluminum frame and housing

Options:

  1. Approved shop drawings required
  2. Vitracite chalkboard
  3. Claridge Cork, Designer Fabric, Fabricork, or Tan Nucork tackable surfaces
  4. Projection screen, flexible matte white
  5. Units with no back panel
  6. Medium or Dark Bronze anodize finish in lieu of satin
  7. Powder Coat Finish
  8. Kick panels - Fabricork or low-pressure laminate in oak or walnut grain
  9. Wireless Remote Control for 1- and 2-sliding panel motorized vertical sliding units
  10. Motor operated vertical sliding units

Thinline Vertical Sliding Units

Thinline

  1. Sliding panels are counter-balanced by lead weights to eliminate racking; panels move smoothly over roller bearing sheaves in the channel guides
  2. Maximum travel of sliding panel is approximately equal to panel's overall height
  3. Housing and trim are satin anodized aluminum
  4. Porcelain enamel steel markerboard sliding panels and back panel; satin anodize finish aluminum framd and housing

Options:

  1. Approved shop drawings required
  2. Vitracite chalkboard
  3. Claridge Cork, Designer Fabric, Fabricork, or Tan Nucork tackable surfaces
  4. Projection screen, flexible matte white
  5. Medium or Dark Bronze anodize finish in lieu of satin
  6. Powder Coat Finish
  7. Kick panels - Fabricork or low-pressure laminate in oak or walnut grain